Keep the heat in and the cold out (or vice versa) with weatherization rebates from the Jefferson County PUD. We have rebates on windows, insulation, and more. And when you do the work of weatherization, be sure to look for air leakage or infiltration, which occurs when outside air enters a house uncontrollably through cracks and openings. Proper air sealing can significantly reduce heating and cooling costs, improve building durability, and create a healthier indoor environment. Also consider adding moisture control and ventilation strategies to ensure your home stays comfortable, healthy, and efficient. Learn more from the Department of Energy here.
Window & Door Replacement Rebate Program
Windows provide our homes with light, warmth, and ventilation, but they can also negatively impact a home’s energy efficiency. You can reduce energy costs by installing energy-efficient windows in your home. Replacing old, single and double pane windows with energy efficient windows helps lower household energy bills by an average of 12 percent nationwide. Requirements: Site built homes, manufactured home, and multifamily buildings are eligible for window and door replacement with Energy Star qualified products. A qualified window contractor must complete installation. Home must have existing single wood, metal or vinyl pane or double pane (metal only) windows. Qualifying window improvement must have a National Fenestration Rating Council (NFRC) rated U-value of .30 or less, or .22 or lower. New sliding glass doors must have a NFRC rated U-Value of 0.35 or lower, or 0.30 or lower. Please provide proof of U-factor for the window job. Before and after pictures of the job are preferred. Window incentive rebates vary from $6 – $8 per square foot; multifamily home incentives range from $12 – $16 per square foot of windows replaced, depending on the electrical heating type of the home. Please see the application for more details. The rebate incentive for exterior doors is $40, and news doors must be Energy Star rated.
| Windows Business Name | Phone Number | Website |
|---|---|---|
| Glass Service Company | (360) 452-1155 | glassservicesco.com |
| Groves Windows | (360) 385-6282 | grovesglass.com |
| Hartnagel Building Supply, Inc | (360) 417-8388 | |
| Sequim Village Glass of Carlsborg, Inc. | (360) 582-3098 |
Insulation Rebate Options
Insulation keeps your home warm in the winter and cool in the summer. Its performance is measured by R-value — the ability to resist heat flow. Higher R-values mean more insulating power. Insulation works best when air is not moving through or around it. It is very important to seal air leaks before installing insulation to ensure the best performance from the insulation. To get the biggest savings, the easiest place to add insulation is usually in the attic. 25% – 35% of a home’s heat escapes through the roof. A quick way to see if a home needs more insulation is to look across the uncovered attic floor. If the insulation is level with or below the attic floor joists, more insulation is probably needed. Additionally, after a heavy snow, if the snow is melting in the center of a home’s roof or in patterns that mirror the rafters, the house may be losing large amounts of heat through the roof.
Insulation rebates are available for site built homes, manufactured homes, and multifamily buildings where additional ceiling and floor insulation is needed to increase the R-value of the home. Installation must be completed by a licensed and bonded contractor. Incentive amount varies from 6 cents per square foot up to $2 per square foot of insulation installed, depending upon the amount of insulation added to the existing R-value of the wall, ceiling, and/or floor.
Common insulation types:
- Fiberglass batts are commonly used in-between studs or rafters when they are exposed in new construction or during a major remodel.
- Blown-in cellulose insulation is commonly used when adding insulation to an existing home’s attic or walls. Or, under a manufactured home, in the “belly”.
- Rigid foam board is used when insulating concrete slabs, cathedral ceilings, basement walls, and flat roofs.
- Spray foam is sprayed into small tight areas. It then expands to form an air-tight seal.
Insulation measures must be installed according to the Bonneville Power Administration (BPA) Weatherization Specifications.
Please note that your home MUST be electrically heated in order to be eligible for a rebate. Please use a contractor from our list of participating contractors. All contractors must be licensed an bonded. See application for details.
For more information on the PUD’s conservation rebate programs call (503) 730-3122 or email rebates@jeffpud.org
| Weatherization/Insulation Business Name | Phone Number | Website |
|---|---|---|
| C & F Insulation, Inc. | (360) 681-0480 | candfinsulation.com |
| D & S Insulation | (360) 301-1958 | |
| Tracy’s Insulation | (360) 582-9600 | tracysinsulation.net |
| Safe Home Resources, LLC | (360) 550-4314 | safecrawls.com |
| A Better Crawl, Inc. | (360) 434-4222 | abettercrawlinc.com |
| Turner Insulation | (360) 491-3487 | www.turnerinsulation.com |
Duct Sealing Rebate Program
Leaky ducts are a major cause of energy loss from heating and air conditioning systems. These leaks are out of sight and you don’t even know that they are negatively impacting your energy costs. Typically, approximately 25% of the heated/cooled leaks into unconditioned spaces in homes with ductwork. Unconditioned spaces of your home include crawlspaces, garages or attics. Requirements: 1)All accessible ducts in unheated areas (i.e. crawlspaces and garages) must be sealed to Prescriptive Duct Sealing Specifications by a certified Performance Tested Comfort Systems (PTCS) technician. 2) Primary heat source must be either an electric force air furnace or a heat pump.
Benefits: Prescriptive or PTCS duct sealing – $250
Low Income Customer Program
OlyCAP Weatherization Program
If you qualify for LIHEAP through OlyCAP, you are also eligible for their weatherization funds. In fact, they may be able to fund the full cost of the home improvements up front, without the customer having to pay first and wait for rebates after the job is complete. Contact them at (360) 452-4726 ext. 6253, or visit their website here.
For more information on rebates call (360) 385-5800 or email efficiency@jeffpud.org